Key Features

XLR and RCA inputs for each of eight channels of amplification with 150 watts per channel output into 8 ohms, with a maximum output of 1500 watts.

Each pair of output channels can be bridged, allowing the amp to provide power to virtually any multi-channel speaker configuration, either on its own or with an A35.2 stereo amplifier.

For an extraordinarily powerful two-channel bi-amplified system, one fully bridged A35.8 delivers peak power of 4 x 375 watts or 750 watts per pair per channel.

Additional convenience features include auto-sense turn-on from standby and auto standby after an absence of input signal for twenty minutes which can be turned off allowing the A35.8 to remain on indefinitely if preferred.

Amplifier technology 

The ingenious design of the A35.8 circuit layout provides the most direct delivery and even distribution of power from the power supply to the amp modules tucked into heatsinks that isolate them from any power supply noise. In turn, this innovative construction isolates the input and output stage from any noise the amp modules might produce. Input and output signals are delivered to and from the amp module through an uninterrupted ribbon of circuit board threaded through a channel in the heat sinks for the shortest possible signal path. 

System Configurations

The bridging capabilities of the A35.8 allow it to be used in a variety of system configurations, with or without the addition of a stereo amplifier, to suit most multi-channel system requirements. A few examples: 

• 5.1, 7.1 and 5.1.2 channel systems can be powered by a single A35.8 
• 5.1.4, 7.1.2, 7.1.4 channel systems can be driven by combining an A35.8 with a number of A35.2 stereo amplifiers
• 9.1.6 and 13.1 Auro 3D systems can be configured using two A35.8 amplifiers 

• A35.8 power amplifier

• eight bridgeable channels

• Class D modules

• 150wpc into 8ohms x8

• 300wpc into 4ohms x8

• 400wpc into 2ohms x8

• 740wpc into 8ohms bridged

• 750wpc into 4ohms bridged

• 8x RCA analogue inputs

• 8x balanced XLR inputs

• 12v trigger in/out

• black or titanium finish

• H145mm x W430mm x D400mm

• 15kg

• 2 year warranty

 This item will usually ship within 1-3 working days.

We try and keep on top of our pricing, but it's a mammoth task for one person. So, if you see this product offered cheaper elsewhere, or you are offered it for less elsewhere (proof will be required) and you feel like supporting an extremely independent retailer, do get in touch and we will do our very best to match or beat wherever we can. We can't promise to do so, as there may some extenuating circumstances where we just wouldn't be able to, but we'll always do what we can.

Needs to be like for like - new for new, ex-demo for ex-demo, same colour and specs etc.