EMOTIVA XPA-2 GEN3 2-CHANNEL POWER AMPLIFIER

 This item will usually ship within 1-3 working days.

The XPA-2 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

The XPA-2 is a two-channel audiophile quality power amplifier, and is perfect for powering:

• A superb quality stereo or 2.1 channel music system.

• The two critical main channels of a 5.1 channel or 7.1 channel home theater system.

Adding an XPA-2 to your current high-quality AVR is a great way to take your two-channel music listening to a whole new level of enjoyment.

Configuration: 2 x High-Powered Single-Channel Modules (five module slots remain available for future expansion)

• 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven

• 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven

• 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven

• 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven

• Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)

• Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB

• THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms

• Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted) > 91 dB; ref 1 watt; unbalanced input (A-weighted)

• Minimum Recommended Load Impedance (per channel): 4 Ohms (one 4 Ohm load or two paralleled 8 Ohm loads)

• Damping Factor (8 Ohm load): > 500

• Input Sensitivity (for rated power; 8 Ohm load): 1.71 V

• Gain: 29 dB

• Maximum Power Consumption: 1,000 watts.

• 17” wide x 8” high x 19” deep (unboxed; including feet

• 17” wide x 7” high x 19” deep (unboxed; without feet)

• 24-1/2” wide x 12” high x 24-3/4” deep (boxed)

• 35.5 lbs (unboxed)

• 40.5 lbs (boxed)