EMOTIVA BasX A7+ 7-CHANNEL POWER AMPLIFIER
The 90wpc EMOTIVA BasX A7+ 7-channel power amplifier provides seven channels of amplification ideal for running a full 7.1 home theatre system, or to upgrade the power and quality of a lower powered AV receiver.
This item will usually ship within 1-3 working days.
The BasX A7 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High quality industry standard unbalanced RCA inputs enable the BasX A7 to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A7 to deliver true audiophile performance and sound quality at an amazingly affordable price.
The BasX A7 is a great choice if you're looking for a high quality seven channel amplifier to go with a processor in a new 7.1 channel surround sound system, or if you're looking for an easy way to upgrade the amps in your existing surround sound receiver.
Power Output (ALL channels driven)
90 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms
125 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms
Power Output (two channels driven)
120 watts RMS per channel; into 8 Ohms
175 watts RMS per channel; into 4 Ohms
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)
Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB
THD + noise: < 0.02% (A-weighted); ref rated power
Signal to Noise Ratio (8 Ohm load):> 115 dB; ref rated power; (A-weighted).
Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 1.2 V
Gain: 29 dB
Input Impedance: 27 kOhm
Input Connections: Unbalanced (RCA); one each per channel
Speaker Output Connections: Audiophile grade 5-way binding posts
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 120 mA.
17” wide x 4” high x 15-1/2” deep (not including connectors)
21-1/2” wide x 8” high x 21” deep (boxed)
30 lbs (unboxed)
36 lbs (boxed)
