EMOTIVA BasX A6 6-CHANNEL POWER AMPLIFIER
The 90wpc EMOTIVA BasX A6 6-channel power amplifier provides six channels of amplification ideal for home theatre system, particularly to run a full six Atmos speakers, or to just add more channels to an existing system.
This item will usually ship within 1-3 working days.
The BasX A6 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High quality industry standard unbalanced RCA inputs enable the BasX A6 to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A6 to deliver true audiophile performance and sound quality at an amazingly affordable price.
The BasX A6 is a great choice if you're looking for a high quality multi-channel amplifier to power three pairs of height speakers, or four pairs of height speakers and a pair of surrounds, or front wides and surrounds, extension speakers, or anywhere you need six channels of high quality amplification. Also, with the use of a “y-adapter,” this amplifier would be the perfect solution for bi-
Power Output (ALL channels driven)
90 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms
125 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms
Power Output (two channels driven)
120 watts RMS per channel; into 8 Ohms
175 watts RMS per channel; into 4 Ohms
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)
Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB
THD + noise: < 0.02% (A-weighted); ref rated power
Signal to Noise Ratio (8 Ohm load): > 112 dB; ref rated power; (A-weighted)
Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500.
Input Sensitivity (for rated power; 8 Ohm load): 1.2 V
Gain: 29 dB
Input Impedance: 27 kOhms
Input Connections: Unbalanced (RCA); one each per channelSpeaker
Output Connections: Audiophile grade 5-way binding postsT
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA
17” wide x 4” high x 15-1/2” deep (not including connectors).
21” wide x 8” high x 21” deep (boxed)
36 lbs (unboxed)
39 lbs (boxed)
