EMOTIVA BasX A5 5-CHANNEL POWER AMPLIFIER
The 95wpc EMOTIVA BasX A5 5-channel power amplifier provides five channels of amplification ideal for running a full 5.1 home theatre system, and can be added to lower powered AV receivers as a quality and power upgrade.
This item will usually ship within 1-3 working days.
The BasX A5 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High quality industry standard unbalanced RCA inputs enable the BasX A5 to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A5 to deliver true audiophile performance and sound quality at an amazingly affordable price.
The BasX A5 is a great choice if you're looking for a high quality five channel amplifier to go with a processor in a new 5.1 channel surround sound system, or if you're looking for an easy way to upgrade the amps in your existing surround sound receiver.
Power Output (ALL channels driven)
95 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms
130 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms
Power Output (two channels driven)
120 watts RMS per channel; into 8 Ohms
175 watts RMS per channel; into 4 Ohms
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)
Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB
THD + noise: < 0.02% (A-weighted); ref rated power
Signal to Noise Ratio (8 Ohm load): > 116 dB; ref rated power; (A-weighted)
Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 1.2 V
Gain: 29 dB
Input Impedance: 27 kOhms
Input Connections: Unbalanced (RCA); one each per channel
Speaker Output Connections: Audiophile grade 5-way binding posts
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA
17” wide x 4” high x 15-1/2” deep (unboxed, not including connectors)
21-1/2” wide x 8” high x 21” deep (boxed)
26.5 lbs (unboxed)
33 lbs (boxed)
