EMOTIVA BasX A3+ 3-CHANNEL POWER AMPLIFIER
The 140wpc EMOTIVA BasX A3+ 3-channel power amplifier provides three channels of amplification ideal for use in home theatre system, particularly to drive a left/centre/right set of loudspeakers as an upgrade over an AV receiver.
This item will usually ship within 1-3 working days.
The BasX A3+ features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High quality industry standard unbalanced RCA inputs enable the BasX A3+ to be used with almost any preamp or processor and audiophile grade five way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A3+ to deliver true audiophile performance and sound quality at an amazingly affordable price.
The BasX A3+ is the ideal choice to power a 3.1 channel system, to upgrade the front three channels of a surround sound receiver, or for anywhere where three channels of great sounding clean power are needed
Power Output (ALL channels driven):
140 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms
200 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms
Power Output (two channels driven):
150 watts RMS per channel; into 8 Ohms
250 watts RMS per channel; into 4 Ohms
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.02 dB)
Broad Band Frequency Response: 10 Hz to 80 kHz +0/-1.8 dB
THD + noise: < 0.02% (A-weighted); ref rated power
Signal to Noise Ratio (8 Ohm load): > 112 dB; ref rated power; (A-weighted)
Minimum Recommended Load Impedance (per channel): 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 1.25 V
Gain: 29 dB
Input Impedance: 27 kOhms
Input Connections: Unbalanced (RCA); one each per channel. Balanced (XLR); one each per channel; one each per channel
Speaker Output Connections: Audiophile grade 5-way binding posts
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 120 m
17” wide x 4” high x 15-1/2” deep (not including connectors)
21-1/2” wide x 8” high x 21” deep (boxed)
25 lbs (unboxed)
31 lbs (boxed)
