AUDIOQUEST ROCKET 33 SPEAKER CABLE 2.5m pair - EX-DEMO

Solid Perfect-Surface Copper (PSC) and Long-Grain Copper (LGC) Conductors
This cable uses a carefully finessed combination of Long-Grain Copper (LGC) and extremely high-purity Perfect-Surface Copper (PSC). LGC has fewer oxides within the conducting material, less impurities, less grain boundaries and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity.

Carbon-Based Noise-Dissipation
This cable's negative conductors are covered with partially conductive Carbon-Loaded Polyethylene. This remarkable material reduces radio-frequency garbage being fed back into the amplifier. The sonic benefit is exactly the same reduction in "hash" and improved dimensionality that comes whenever RF interference is reduced in an audio circuit. In addition, a carbon layer damps interaction between positive and negative conductors, and an external Carbon-Based Noise-Dissipation System reduces external interference.

Double Star-Quad Geometry
The relationship between conductors defines a cable's most basic electrical values (capacitance and inductance). However, even when those variables are kept in reasonably neutral balance, the particular geometric relationship between conductors greatly affects the sound. Star-Quad geometry is not only vastly superior to conductors run in parallel, but also to the same conductors as two twisted pairs.

Foamed Polyethylene Insulation
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. This cable, however, uses air-filled Foamed-Polyethylene Insulation on both conductors. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

• Solid Perfect-Surface Copper and Long-Grain Copper Conductors: Solid conductors prevent electrical strand-to-strand interaction, a major source of distortion. The smooth surface of AudioQuest’s conductor metals nearly eliminates harshness and greatly increases clarity compared to lesser materials.
• Double Star-Quad Geometry: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). AudioQuest’s Double Star-Quad geometry is vastly superior to conductors run in parallel as well as to the more common twisted pairs, resulting in less distortion.
• Carbon-Based Noise-Dissipation System: This cable’s negative conductors are covered with partially conductive Carbon-Loaded Polyethylene, which prevents radio-frequency noise being fed back into the amplifier. The reduction in external interference results in clearer sound and greater dimensionality.
• Foamed-Polyethylene Insulation: Most common insulation materials absorb energy, some of which is stored and then released as distortion. With its high air content and benign distortion profile, AudioQuest’s Foamed-Polyethylene causes much less of the out-of-focus effect common to other materials.
• Direction-Controlled Conductors: A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors assure induced noise is dissipated and drained properly.
• Solid Perfect-Surface Copper & Long-Grain Copper Conductors: Minimizes electrical interaction and distortion for a smoother, clearer audio experience compared to lesser conductor materials.
• Double Star-Quad Geometry for Low Distortion: Enhanced geometry reduces distortion and ensures a more consistent signal compared to parallel or twisted-pair designs.
• Carbon-Based Noise-Dissipation System: Reduces radio-frequency interference for clearer sound and improved audio dimensionality by using Carbon-Loaded Polyethylene insulation.
• Foamed-Polyethylene Insulation for Clarity: Reduces energy absorption and distortion, resulting in a more focused and accurate sound with minimal interference.
• Direction-Controlled Conductors: Ensures noise is effectively drained for better signal clarity, a key part of AudioQuest’s Noise-Dissipation technology

Materials & Design
Metal	Solid Perfect-Surface Copper (PSC) & Long-Grain Copper (LGC)
Gauge	2.08mm²
Geometry	Double Star-Quad
Insulation	Foamed-Polyethylene (For All Positive Conductors)
Jacket	Red on Black Nylon Braid
Features & Performance
Noise-Dissipation	Carbon-Based Noise-Dissipation

This item will ship same day or next working day from day of order.

We try and keep on top of our pricing, but it's a mammoth task for one person. So, if you see this product offered cheaper elsewhere, or you are offered it for less elsewhere (proof will be required) and you feel like supporting an extremely independent retailer, do get in touch and we will do our very best to match or beat wherever we can. We can't promise to do so, as there may some extenuating circumstances where we just wouldn't be able to, but we'll always do what we can.

Needs to be like for like - new for new, ex-demo for ex-demo, same colour and specs etc.