AUDIOQUEST DIAMOND COAXIAL DIGITAL CABLE

Solid Perfect-Surface Silver (PSS) Conductors
Solid conductors prevent electrical and magnetic strand-interaction. PSS Solid-Silver minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation.

Carbon-Based 6-Layer Noise-Dissipation
It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

72v Dielectric-Bias System (DBS) w/ RF Trap
Insulation is also a dielectric that can act like a shunt-filter. Biasing minimizes dielectric-noise and linearizes the filter, significantly improving wide-bandwidth dissipation of induced RF noise.

Hard-Cell Foam Insulation
Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.

Cold-Welded, Hanging-Silver Directly Over Pure Red Copper

• Solid Conductors: Solid conductors prevent strand-interaction, a major source of dynamic distortion in cables.
• Perfect-Surface Silver Metal: AudioQuest's highest-quality metal. Perfect-Surface Silver minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation.

Metal	Solid 100% Silver
Insulation	Hard-Cell Foam
Shield	Silver-Plated Braid
Jacket	Silver on Black Nylon Braid
Terminations	Cold-Welded, Hanging-Silver Directly Over Pure Red Copper
Features & Performance
Noise-Dissipation	Carbon-Based Mesh-Network + Directional RF Draining

Stock is held in Netherlands at AudioQuest, hence our current delivery times of around 6-9 working days. We will endeavour to get this item to you as quickly as possible. 

We try and keep on top of our pricing, but it's a mammoth task for one person. So, if you see this product offered cheaper elsewhere, or you are offered it for less elsewhere (proof will be required) and you feel like supporting an extremely independent retailer, do get in touch and we will do our very best to match or beat wherever we can. We can't promise to do so, as there may some extenuating circumstances where we just wouldn't be able to, but we'll always do what we can.

Needs to be like for like - new for new, ex-demo for ex-demo, same colour and specs etc.